Wholesale Low Noise Steady Water Supply Anti Corrosion Horizontal High Head Centrifugal Booster Pump

• After-sales Service: Online
• Warranty: 2 Years
• Max.Head: 30-50m
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: CHLF(T)2-2
• Max.Capacity: 100-200 L/min
• Driving Type: Motor
• Impeller Number: Multistage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Since Irrigation Centrifugal Pumps
• Impeller: Closed
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
• Rpm: 2900
• Transport Package: Wooden Box
• Specification: customized
• Trademark: aikon
• Origin: China
• Production Capacity: 50000PCS/Year
• Package Size: 50.00cm * 40.00cm * 40.00cm
• Package Gross Weight: 20.000kg

Product Description

CHLF, CHL, CHM, CHLF(T) are non-self-priming light horizontal multistage centrifugal pump. They are efficient, low noise, little corrosive tolerance, compact structure, good looking, small volume, light weight, etc.

Product Description

Working Principle:	Centrifugal
Main applications:	Water, Chemical
Driver:	Electric motor
Power Specs:	220-240V single phase,  220-240V/380-415V three phase 50Hz or 60Hz
Max.permissible fluid temperature:	-15°C to +70°C(hot water type max 110°C)
Type of connection:	Inlet thread, hose, flange
Installation position:	Horizontal
Casing parts material:	Stainless steel 304 or 316
Shaft seal type:	Mechanical seal
Maximum drive rating:	4KW(6HP)
Maximum caliber:	50mm(2inch)
Maximum discharge-side pressure:	0.6MPa(6bar)
Maximum head:	60m(196.8ft)
Flow rate range:	0.5-28m3/h(2.2-123.20US.GPM)

Product Feature

Introduction

1. Impeller and wet parts are made of stainless steel.
2. It's with the merits of small size, light weight, compact structure, low noise, easy to install and used.
3. Horizontal multistage non-self-priming centrifugal pump, attached with long shaft electric motor.
4. Axial inlet and radial outlet.
5. CHL flow passage components stainless steel 304 or 316, CHLF is stainless steel 304 or 316 segmental type pump body,        CHLF(T) is segmental type pump body and discharge are made of cast iron.

Liquid temperature

Normal temperature type:-15°C to +70°C
Hot water type: -15°C to 110°C
Ambient temperature: up to +40°C
Max.operation pressure: 10 bar
Max. Inlet pressure is limited by max. Operation pressure

Working conditions

CHL, CHLF and CHLF(T) type pump are mainly used in industrial field:
Air-conditioning system
Cooling system
Industrial cleaning
Water treatment (Water purification)
Aquiculture
Fertilizing / metering system
Environmental application
Other special applications

Applicable medium

Thin and clean non-flammable and non-explosive liquid without solid granules and fibers.
Mineral water, soft water, pure water, edible vegetable oil and other light chemical mediums.
When the density or viscosity of to-be-conveyed liquid is larger than that of water, it is necessary to select a driving motor of high-power.
Whether a specific liquid is suitable for the pump depends on many factors, among which the most important ones are chlorine content, PH value, temperature, solvent and oil content.

Product Parameters

Detailed Photos

Application

 

Integrated pump control solution
Horizontal SS variable frequency pump

Product advantage:
High quality and famous brand bearing,mechanical seal,capacitor,St. Steel etc.
Featuring simple operation, good reliability, low noise and high performance

Application:
Water treatment,Water supply,Industrial boosting,Industrial liquid conveying,Irrigation
 

 

Company Profile

Packaging & Shipping

FAQ

Q1: What is your product range ?
A: We have the ability to manufacture water pumps of various materials, VFD,valves,etc.And our pumps are including slurry pumps, multi-stage pumps, pipeline pumps,sewage pumps, etc.

Q2: Can you produce according to the samples ?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q3: Is OEM parts available ?
A:Yes, please send me the detailed drawing. Different materials and colors are available.

Q4: how can we guarantee quality ?
A: We Always a pre-production sample before mass production;Always final inspection before shipment;

Q5: What are your advantages ?
A: Rapid development of new products, full range of products, professional service timely quotation and reply promptly, strict quality inspection, strong in after-sales problem solving.